Ouch! Be careful not to get your powders mixed up, bad things can happen...
Big AR-15 KABOOM
This is by far the worst AR-15 kaboom I have ever seen on the internet. The operator somehow mistakingly mixed pistol powder and rifle powder in a few of the cartridges he loaded. The result was catastrophic failure. Just about all the parts were destroyed. Photos from ARFCOM ...
Apparently the gold-like coating on the bolt and carrier is from the vaporized brass cartridge. Can any engineers or chemists confirm this?
The shooter was ok, other than getting whacked in the face with the charging handle and having small pieces of the carbon fiber freefloating tube embedded in his forearm.
More photos after the jump ...
The rifle parts list ...
Big AR-15 KABOOM
This is by far the worst AR-15 kaboom I have ever seen on the internet. The operator somehow mistakingly mixed pistol powder and rifle powder in a few of the cartridges he loaded. The result was catastrophic failure. Just about all the parts were destroyed. Photos from ARFCOM ...
Apparently the gold-like coating on the bolt and carrier is from the vaporized brass cartridge. Can any engineers or chemists confirm this?
The shooter was ok, other than getting whacked in the face with the charging handle and having small pieces of the carbon fiber freefloating tube embedded in his forearm.
More photos after the jump ...
The rifle parts list ...
Parts list:
Cav-arms mk2 lower in tan + lower parts kit.
Custom trigger pins.
Compass lake 18" govt profile douglas premium airguaged stainless steel barrel with matched bolt.
Ameetec cam pin, firing pin, firing pin retainer pin, slick side upper receiver.
Charging handle
USGI 30rd aluminum magazine with Magpul follower, and Magpul magpul in OD green.
Miculek brake
YHM low profile gas block, gas tube
Clark custom forearm, carbon fiber lightweight tube
Young mfg bolt carrier.
Timney trigger
Parts destroyed:
upper, lower receivers.
BCG: total loss
Forearm
barrel, gas tube, gas block, muzzle brake,
LPK: mag release, bolt release, custom trigger pins, take down pins.
charging handle is bent.
USGI mag with magpul follower and ODgreen magpul.
Parts salvaged:
sling, bipod, buffer, buffer spring, selector(safety), timney trigger(maybe I have not tested it yet),
ACOG.
Cav-arms mk2 lower in tan + lower parts kit.
Custom trigger pins.
Compass lake 18" govt profile douglas premium airguaged stainless steel barrel with matched bolt.
Ameetec cam pin, firing pin, firing pin retainer pin, slick side upper receiver.
Charging handle
USGI 30rd aluminum magazine with Magpul follower, and Magpul magpul in OD green.
Miculek brake
YHM low profile gas block, gas tube
Clark custom forearm, carbon fiber lightweight tube
Young mfg bolt carrier.
Timney trigger
Parts destroyed:
upper, lower receivers.
BCG: total loss
Forearm
barrel, gas tube, gas block, muzzle brake,
LPK: mag release, bolt release, custom trigger pins, take down pins.
charging handle is bent.
USGI mag with magpul follower and ODgreen magpul.
Parts salvaged:
sling, bipod, buffer, buffer spring, selector(safety), timney trigger(maybe I have not tested it yet),
ACOG.
Comment