I'm taking short to a new level

[futant]

ok i get it, suppressor increases cycling/pressure
so if you tried to switch mags to supersonic would it fubar the can , or would just be a little louder than normal (vs. longer barrel) ?
what about long strings of supersonic firing, melt down?
is the suppressor stainless, stainless baffles only ?

the more i think about it 300blk isnt that high of pressure/heat even super

[CJ]

ok i get it, suppressor increases cycling/pressure
so if you tried to switch mags to supersonic would it fubar the can , or would just be a little louder than normal (vs. longer barrel) ?
what about long strings of supersonic firing, melt down?
is the suppressor stainless, stainless baffles only ?

the more i think about it 300blk isnt that high of pressure/heat even super

It's a titanium can, and it isn't going to be damaged by such a low pressure cartridge like .300blk. It's a .300 magnum can, this is like a blackcat firecracker inside it.

[CJ]

.109" gas port did it. Here's a video I made.

[KBScobravert]

That is good news. It is hog killing time.

So I have to ask, how is the accuracy now with that 6" barrel? Minute of soda can or minute of 5gl bucket or barns side at 100yrd?

How do you rate the Core15 stuff compared to Bravo Companies wares or a Wilson, Noveske, Shillen etc?

[CJ]

That is good news. It is hog killing time.

So I have to ask, how is the accuracy now with that 6" barrel? Minute of soda can or minute of 5gl bucket or barns side at 100yrd?

How do you rate the Core15 stuff compared to Bravo Companies wares or a Wilson, Noveske, Shillen etc?

Honestly when it comes to accuracy barrel length isn't that important. You're just going to lose velocity. And for a subsonic only gun, velocity doesn't matter. It just means the quality of the barrel needs to be excellent, because you don't have much time to get it right before the projectile leaves the barrel. My 7.5" .223 barrel shoots 1moa, my 4.5" clint beyer .22 barrel shoots 1.5moa. As for this barrel, I haven't shot paper with it, but shit went where I asked it to go. I'll have to see. The Core15 barrel is fine, I haven't had any complaints from it. All I know is Wilson, Noveske, BCM, and Shillen are really expensive. Core15 isn't. I'm not going to shoot matches with it or take elk at 1000 yards, so why waste the money?

[Mike K]

I don't know what made me smile more, the birds chirping in the background or the full auto action.

[Pokulski-Blatz]

Looks like it ran great dude. One of these days I want to hear that shot with sub sonic stuff, I am thinking of building one myself now.

[whitetrash]

That's sweet. I need to get around to doing an sbr build

[KBScobravert]

That's sweet. I need to get around to doing an sbr build

Everyone is doing it. I bet this board has more folks with SBRs than with Mustangs. Poll idea?

[IHaveAMustang]

Everyone is doing it. I bet this board has more folks with SBRs than with Mustangs. Poll idea?

I do have more SBR's than I do have Mustangs.

[Sean88gt]

I don't know CJ, that shirt looks a little short on material as well

[Pokulski-Blatz]

I don't know CJ, that shirt looks a little short on material as well

I guess finding shirts in size XL Bear isn't easy.

[Sean88gt]

I guess finding shirts in size XL Bear isn't easy.

Throw an extra X or two on there. I have a buddy that played football at CU and in Europe, he has to get creative.

[Pokulski-Blatz]

Throw an extra X or two on there. I have a buddy that played football at CU and in Europe, he has to get creative.

Bear sizing runs larger.

[bird_dog0347]

hmmmm, sadly I've got more mustangs than SBRs... 2 Mustangs, 0 SBRs. I guess I need to send in $200 and the forms.