bullpup build

[forbes]

centerfire has a few psl kits. the problem with new kits is the barrel has been cut on them. and i believe they do not have the rear trunnion. i have a rivet tool (home made from bolt cutters that works good) if you need to borrow it

[futant]

centerfire has a few psl kits. the problem with new kits is the barrel has been cut on them. and i believe they do not have the rear trunnion. i have a rivet tool (home made from bolt cutters that works good) if you need to borrow it

has to be a draco for this bullpup kit , right ?
I don't think i would want to take the chance of something not fitting.
it's one thing to have to install and tune the trigger on a bullpup setup, it's a whole nothing thing to build an ak pistol from parts and then make the bullpup kit fit.

also those PSL kits appeared to be rifle receivers. So you can't use those for a pistol legally, can you ?

[futant]

Be a man and build an HK type roller lock gun

donations accepted ! I would even just like to shoot a roller lock mechanism gun! is the action pretty smooth or what? from a mechanical perspective I've always thought the roller delayed setups are cool.

[Mr_Fiux]

If you build your own ak with a flat non bent receiver do you need to be 922r compliant? I ask because the AK receiver wont have a serial?

[ThreeFingerPete]

A receiver is a receiver.

[Mr_Fiux]

All the ones Ive found that are not bent dont require an FFL... Da fuq?

[CJ]

Be a man and build an HK type roller lock gun

Not for women and children.

[futant]

A receiver is a receiver.

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=281885261

so like with the above example, the guy did he perm mount that muzzle device to get a 16" barrel
so a reciever isn't stuck a pistol or rifle, it's more about having the correct legal requirements (length of barrel, stock, whatever) for that configuration?

I always thought for example you couldn't take a pistol lower (AR or whatever) and convert to rifle. or the opposite. So that is wrong then ?

could I take the example rifle above , remove perm flash hider and stock and whalla basically it's a draco again ? (then i would do the bullpup kit )

I mean hell if I'm going to pay 600 for a draco , might as well get more shit!
that way if i didnt like it I could use as a rifle instead.

[YALE]

http://www.gunbroker.com/Auction/Vie...Item=281885261
so like with the above example, the guy did he perm mount that muzzle device to get a 16" barrel
so a reciever isn't stuck a pistol or rifle, it's more about having the correct legal requirements (length of barrel, stock, whatever) for that configuration?

I always thought for example you couldn't take a pistol lower (AR or whatever) and convert to rifle. or the opposite. So that is wrong then ?

could I take the example rifle above , remove perm flash hider and stock and whalla basically it's a draco again ? (then i would do the bullpup kit )

I mean hell if I'm going to pay 600 for a draco , might as well get more shit!
that way if i didnt like it I could use as a rifle instead.

voilà

[forbes]

if it was me, i would find one with russian tooling. which has the dep depression by the mag catch, and most def. the X, Y , I stamps...
and no a receiver is not a receiver... there are tons of variants

[ThreeFingerPete]

Once you make a receiver into a rifle, then its a rifle according to the atf.

[Mr_Fiux]

Adam did you buy or build your draco pistol?

[ThreeFingerPete]

Adam did you buy or build your draco pistol?

Bought my mini draco complete.

[bulldog896]

Exactly my assumption of the typical bullpup AK owner. Superman tattoo with sunglasses indoors.

whats wrong with sunglasses inside? I'm like Corey Heart I wear my sunglasses at night

[bulldog896]

It looks like he glued the ar tube to the rear trunion

http://www.gunbroker.com/Auction/Vie...Item=281885261
so like with the above example, the guy did he perm mount that muzzle device to get a 16" barrel
so a reciever isn't stuck a pistol or rifle, it's more about having the correct legal requirements (length of barrel, stock, whatever) for that configuration?

I always thought for example you couldn't take a pistol lower (AR or whatever) and convert to rifle. or the opposite. So that is wrong then ?

could I take the example rifle above , remove perm flash hider and stock and whalla basically it's a draco again ? (then i would do the bullpup kit )

I mean hell if I'm going to pay 600 for a draco , might as well get more shit!
that way if i didnt like it I could use as a rifle instead.