FSB visible with low power scope?

[Trick Pony]

I have decided to go with the Burris AR-332 for my AR.

http://www.burrisoptics.com/ar332.html

It's got an A2 FSB on it and I was wondering for those of you that have scopes on your ARs, when you have the power turned down to 3x can you see the FSB at all or is it invisible? I think if there is a ghost image it's going to annoy me, in which case I'll get a low profile gas block.

[helosailor]

I can't see the FSB on mine at all, on any power setting. It has the "F" marked A2 FSB.
I have this scope:

http://www.petra.com/bushnell-733960-trophy-xlt-3-9x40-matte-multi-x-riflescope.html

on this mount:

http://www.amazon.com/gp/product/B003EL97V0/ref=pd_lpo_k2_dp_sr_2?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B001WIYQNG&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=18NTMY3X7F0PY38YCH6S

[94StangFiveO]

Flip sight or no Front sight FTW

[YALE]

YHM makes an integrated gas block/flip front sight that I have and love.

[Trick Pony]

I guess I'll just have to wait until it comes and see. If I can't see it at all in the scope then I'll leave the FSB on. If I can see it then I'll probably get the gas block with the integrated flip up sight like Yale mentioned.
One nice thing about the AR-332 is the reticle is etched in the glass so even if your battery dies you can still see it in black, just not illuminated.

[Brandon-k]

I guess I'll just have to wait until it comes and see. If I can't see it at all in the scope then I'll leave the FSB on. If I can see it then I'll probably get the gas block with the integrated flip up sight like Yale mentioned.
One nice thing about the AR-332 is the reticle is etched in the glass so even if your battery dies you can still see it in black, just not illuminated.

You can get a riser for the Burris. Should sit well above the FSP then.

[Trick Pony]

You can get a riser for the Burris. Should sit well above the FSP then.

Here is a question. Won't raising the scope effect the bullet drop compensation? I would think that if you raise it up and zero for 100 yards then at longer distances it's going to shoot a little high.
If you look at this page, it includes sight height with the results so I would think it comes into play.

http://www.burrisoptics.com/ar332.html

[Trick Pony]

Mounted the AR-332 today. Can barely see a ghost image of the FSB sometimes depending on how much light there is and where your eye is at. I don't think it's going to bother me.
So far I'm impressed with it. The reticle and scope are very clear once I got the focus right and the illumination is plenty bright in full sunlight. Probably won't get a chance to test it out for a few weeks.