Del-Ton AR 15?

[Pro88LX]

Kit is coming in earlier than I expected. Should be here Friday.

Haven't bought a single tool yet to put it together.

what kit did you order?

I assembled with basic hand tools since the upper was already assembled.

[CexMashean]

what kit did you order?

I assembled with basic hand tools since the upper was already assembled.

It's in my original post up top.

[Craizie]

It's in my original post up top.

A razor blade and maybe a punch set is all you need for the lower

[KBScobravert]

A razor blade and maybe a punch set is all you need for the lower

I use a even skinnier punch and a clevis pin vs using the razor blade trick. Slide in the 1/4" clevis pin, line up the holes, drop in the spring and brass detent, push down into the receiver with the punch, rotate the clevis as you take out the punch. Take your take down piano push it in as the clevis cones out the other end.

[HarrisonTX]

Kit is coming in earlier than I expected. Should be here Friday.

Haven't bought a single tool yet to put it together.

I literally put together my first lower with a pocket knife, and Allen Wrench for a punch, and a pair of pliers, your don't need much.

A punch and a razor, like crazie said, is all you need.

When driving in the bolt catch pin, using some tape to protect the finish. It really makes it easier.

[Grimpala]

I literally put together my first lower with a pocket knife, and Allen Wrench for a punch, and a pair of pliers, your don't need much.

A punch and a razor, like crazie said, is all you need.

When driving in the bolt catch pin, using some tape to protect the finish. It really makes it easier.

QFT. I built mine with a screw driver used for glasses repair and pair of needle nose pliers.

This aint rocket surgery.

Watch some youtubes, put it together and go shooting.

[garycrist]

Runner Runner is a GREAT place that has bent over for me
as well as for everyone I have seen go in there.
Just my 2p

[CexMashean]

What the fuck am I supposed to do with all of this?
/s

[Grimpala]

It's a lego set for grown-ups. Youtube it and put it together.

[juiceweezl]

LOL You need the printout to identify all the springs and pins, and then the 2 short Youtube videos that have been posted here many times. Use a razor blade for the one detent spring or it will go flying.

These videos:



[/QUOTE]

[CexMashean]

So, Del-Ton was nice enough to send me two pivot pins, instead of a take down pin.
Where can I buy one locally?

[HarrisonTX]

So, Del-Ton was nice enough to send me two pivot pins, instead of a take down pin.
Where can I buy one locally?

Dude that's a bummer. Good news is you can basically do the entire build other than that one pin

[CexMashean]

I actually found out that I can still use the second pivot pin if I put it in from the left side, and when I get another take down pin, i can replace it. It'll just look funky with the pivot pin sticking out of the left side.

[juiceweezl]

So, Del-Ton was nice enough to send me two pivot pins, instead of a take down pin.
Where can I buy one locally?

Try here: http://shop.frontsightfirearms.com/

or Runner Runner if you're close to McKinney.

[CexMashean]

Ended up at Runner Runner. Went ahead and bought the quick release pins. Haven't replaced the pivot pin yet, only the take down.

And I grabbed a clear mag while i was there because I couldn't tell my inner child no.