Announcement

Collapse
No announcement yet.

CJ

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    CJ

    Got the gas block and attempted to replace, without success this far.

    I removed the flash hider, removed handguards and removed the 3 hex head screws that hold the factory gas block to barrell. I'm unable to remove the gas tube from the block...thought I would seek more advice before I mess up the tube...should it just slide right out?? Suggestions, tips, tricks, advice??

    Thanks,

    Brent
    Tags: buzzo #1 fan, cj armbars ar15, cj blackdildo king, cj blackrifle king
  • #2
    Did you remove the role pain holding the gas tube into the gas block? Want to punch out that little pin holding the gas tube to the gas block it will come easy.
    sigpic🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄

    Without my gun hobby. I would cut off my own dick and let the rats eat it...
    🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄

    Comment

    • #3
      It's beary tricky, I'd be careful
      Originally posted by Theodore Roosevelt
      It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming...

      Comment

      • #4
        [ame]http://www.youtube.com/watch?v=-gv1A9lh0MI[/ame]

        [ame]http://www.youtube.com/watch?v=l4rkeCzwteo[/ame]
        .

        Comment

        • #5
          Originally posted by probie View Post
          it's beary tricky, i'd be careful
          lol!!

          Comment

          • #6
            The block is secured with 3 hex screws. There is a hole on the block, but it doesn't appear that there is a pin inside of it??

            Would post photo, but unsure how to do so from phone.

            Comment

            • #7
              Originally posted by BEARY View Post
              lol!!
              That was so bad I actually feel the need to apologize
              Originally posted by Theodore Roosevelt
              It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming...

              Comment

              • #8
                There was, in fact, a pin in there!!

                Thanks guys!

                Comment

                • #9
                  Roll pin, what a pain.

                  Comment

                  • #10
                    Got the new block on and should receive the new handguard/rail tomorrow.

                    Thanks again for the help and the laugh!

                    Comment

                    • #11
                      yeah some blocks are pinned in. Glad you got it out. Roll pins are easy. Taper pins however can be the devil.
                      "When the people find that they can vote themselves money, that will herald the end of the republic." -Benjamin Franklin
                      "A democracy will continue to exist up until the time that voters discover that they can vote themselves generous gifts from the public treasury." -Alexander Fraser Tytler

                      Comment

                      • #12
                        Now.....if UPS would just show up!!!

                        Comment

                        • #13
                          CJ/anyone - received the rail and appears I have to remove the delta ring....lesson needed plz

                          Comment

                          • #14
                            Originally posted by BEARY View Post
                            CJ/anyone - received the rail and appears I have to remove the delta ring....lesson needed plz
                            Do you have barrel nut wrench? If not you'll have to cut it off. The collar is aluminum and thicker than it looks, but you can crack it with some large dikes, then you just pull the c clip and the spring off. Sometimes I use a cutoff wheel, a dremel would work also. Best way to do this is grab the c clip and pull it back so it releases tension on the spring, slide those away and then cut the collar off.

                            Where do you live exactly?
                            Last edited by CJ; 03-25-2014, 03:54 PM.
                            "When the people find that they can vote themselves money, that will herald the end of the republic." -Benjamin Franklin
                            "A democracy will continue to exist up until the time that voters discover that they can vote themselves generous gifts from the public treasury." -Alexander Fraser Tytler

                            Comment

                            • #15
                              I'm in NRHills CJ. Can travel is needed. Like to learn as I do it, with someone that has the knowledge rather than fk something up. I'll PM you...

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X