AR lower receiver build tools?

[mustang_revival]

Avocado, snorkel, and an ice pick

[Venix]

http://www.gilbertsguns.com/Fall+Specials/Weaver+88+Piece+Deluxe+Gunsmithing+Tool+Kit+849719

That look to have everything needed? I hate to piece meal a tool kit if one can come with everything.

[MULEY4X4]

I would highly suggest doing this. Have done it on all of mine works great!!

http://www.ar15.com/forums/t_3_118/395777_Simple_fix_for_the_rear_takedown_detent_spring_blues____.html

CJ showed me this at the last build party. It's harder to do without this step.

[KBScobravert]

I put my parts in the kitchen next to the sammich fixings and have the wife kill two birds with one stone.

I sprinkle mine into my baby girls crib and come back in 20 minutes to find it built. I do give her the clevis pin though for the front detent and spring.

[8mpg]

I would highly suggest doing this. Have done it on all of mine works great!!

http://www.ar15.com/forums/t_3_118/395777_Simple_fix_for_the_rear_takedown_detent_spring_blues____.html

CJ showed me this at the last build party. It's harder to do without this step.

Kbscobravert posted this a while back. Im buying the tap and set screws in the morning

[nightfly2000]

Avocado, snorkel, and an ice pick

you used that many tools?

[Chopped54]

Kbscobravert posted this a while back. Im buying the tap and set screws in the morning

I thought that was a bad ass feature if the Aero lowers

[soap]

I have a few receivers now, and I managed to get LPKs for a couple as well. I was going to assemble them, but I am not exactly sure what tools will be needed.

Could we make a list or any post links to kits or various tools that are necessary and also tools that are helpful but not necessary. I know we have a lot of people who have built, so it is time to share the knowledge!

a vise grip with duct tape on it's jaws.and a blade is all you need. i don't like to use punches no hammering. no scratching.

[KBScobravert]

I thought that was a bad ass feature if the Aero lowers

The rears were tapped in the last GB lowers also. Pretty nice. Nonetheless it is a 4-20 tap and set screw. Pretty easy to do. Heck I still have probably 80 set screws left from the 100 that Fastenal sold me.

[8mpg]

I didnt notice that the Aero lowers I got were tapped. Either way I have to buy the tap and screws for the other lowers.