My DIY mag extension

[CJ]

I have some black cast nylon 6/6.

that's good stuff.

[slowyellow]

That looks awesome man. Are you planning on making quite a few of them when you get the finished product done? I've been trying to find a shield for a while now, they are pretty hard to come by.

[GAP]

That looks awesome man. Are you planning on making quite a few of them when you get the finished product done? I've been trying to find a shield for a while now, they are pretty hard to come by.

With the material I have available, I think I can make about 14 or so. Whatever I dont keep for myself i'll probably give away or sell on the cheap. I dont plan on doing any production runs with the idea of selling though.

On a side note, black nylon 6/6 isn't very black. More like a deep navy color. Nothing duracoat cant remedy.

[inline 6]

Man that really makes me miss my cnc

[slowyellow]

With the material I have available, I think I can make about 14 or so. Whatever I dont keep for myself i'll probably give away or sell on the cheap. I dont plan on doing any production runs with the idea of selling though.

On a side note, black nylon 6/6 isn't very black. More like a deep navy color. Nothing duracoat cant remedy.

Is that the stock spring? And let me know if you have any left over if you are looking to get rid of one or two of them.

[GAP]

Is that the stock spring? And let me know if you have any left over if you are looking to get rid of one or two of them.

For sure! When I make extra, i'll let you know.

It is the stock spring. If I had a longer spring, I would try a +4 extension.

[GAP]

While my acrylic extension did raise lots of eyebrows and questions at the range, I think these look a lot better. Nylon can be a bitch to get a clean finish on especially if you're running without coolant. So, after I scrape/flame off the fuzz, i'll spray it black and call it done.

[KBScobravert]

That came out awesome.

[GhostTX]

That came out awesome.

Ya it did!

Good work!