Tweet
I have a Remington 700 .308, my father purchased an ultimate sniper stock for it, the issue I am having with it is that it doesn't have a floor plate, just an empty well basically. Can I just buy a floor plate or what can I do to fix it. I will post link to the stock.
-
-
Yep you need to buy the hinged floorplate magazine box and follower with spring. Midway usa sells parts, as does Brownells."It's another burrito, it's a cold Lone Star in my hand!"Comment
-
it will work with this specific stock? And it doesn't have a place for a magazine in the bottom, will that affect what I needOriginally posted by dee View PostComment
-
I had a Savage 12 in .308 mounted in a super sniper stock. The rifle had the blind magazine and worked in the sniper stock, but I usually just fed it 1 at a time from the bench...
I like the Choate Tactical Stock I have on my model 10 a lot better than the SS stock..."Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." - Thomas Jefferson, 1776Comment
-
There isn't a specific stock on that website just a list of the available stocks."It's another burrito, it's a cold Lone Star in my hand!"Comment
-
OP, sent you a PM. You shouldn't have to buy any parts to make the new stock work..."Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." - Thomas Jefferson, 1776Comment
-
I think what I need is an internal magazine if that makes any senseComment
-
Does your rifle have a hinged floor plate?"It's another burrito, it's a cold Lone Star in my hand!"Comment
-
The internal magazine is the stock itself, you just need the spring and follower..."Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." - Thomas Jefferson, 1776Comment
-
No hinged floor plateComment
-
Where do I get spring and follower?Comment
-
So yours is an ADL just a trigger gaurd. You can do the conversion like I said in my first post if the stock you get is for BDL (hinged floor plate) if the stock is still ADL then just use your factory pieces."It's another burrito, it's a cold Lone Star in my hand!"Comment
-
You can get the parts from all kinds of places online. Most reputable would be brownells or midway USA..."Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." - Thomas Jefferson, 1776Comment
-
Thank you, and Dee my issue is I don't have the factory parts anymore, my father threw/ gave them away or somethingComment
Comment