2012 DFWMustangs.net AR-15 lower group buy

[TeeShock]

Why? Have you seen an AR-15 stock? All of the cheap ones are equally cheap. If you don't want a cheap one, then don't look at $35 stocks.

I don't want cheap quality, but it needs to be reasonably priced. Soap likes his setup.

What are some well built stocks/buffer kits I should be looking into??

[CJ]

I don't want cheap quality, but it needs to be reasonably priced. Soap likes his setup.

What are some well built stocks/buffer kits I should be looking into??

Well, honestly they work just fine, it's a cheaper stock and buffer, but it isn't going to change your rifles performance at all. And you could always sell it for a profit if you need to.

Magpul MOE is decent for the money, CTR is a little better, ACS is a little bit better than that, and UBR is all inclusive everything needed, but it costs a fortune. Vltor also makes excellent stocks.

[TeeShock]

I've used them, they work perfectly fine.

do you have any idea who makes them? they aren't airsoft gun parts are they lol?

[CJ]

do you have any idea who makes them? they aren't airsoft gun parts are they lol?

It's $35 bucks man, haha, that's cheaper than most buffer tubes alone.

[Gtracer]

It's $35 bucks man, haha, that's cheaper than most buffer tubes alone.

Plus the gun will still shoot regardless of the stock....

Seems like this guy is demanding to pay more than he has to for a stock

[CJ]

Plus the gun will still shoot regardless of the stock....

Seems like this guy is demanding to pay more than he has to for a stock

On an AR15 the buffer tube, buffer, and spring play an important roll in reliability, so it can have an effect. However, I've installed 5 of these on rifles and they functioned perfectly fine.

[Chopped54]

I put one of these on my last GB build and it has worked fine:

http://www.ebay.com/itm/MIL-SPEC-BUFFER-TUBE-KIT-HEAVY-DUTY-/260946954631?pt=LH_DefaultDomain_0&hash=item3cc1a68987

On my current build I used one of the PWS tubes and will never use anything else!!

[bigmuskie]

I put one of these on my last GB build and it has worked fine:

http://www.ebay.com/itm/MIL-SPEC-BUFFER-TUBE-KIT-HEAVY-DUTY-/260946954631?pt=LH_DefaultDomain_0&hash=item3cc1a68987

On my current build I used one of the PWS tubes and will never use anything else!!

In the description of the PWS buffer tube it reads that it eliminates carrier tilt on a piston system. Would there be any reason why it won't work on a DI system?

[soap]

LMFAO

Lol. Im never going to here the end of it.

Any suggestions for a 6.8 barrel?

[hotrod66stang]

I'm finding conflicting info, so I'll just ask here.

If I order the AR10 lower, will the LPK work? I'm under the impression that the ArmaLite stuff and DPMS stuff won't go together.

[KBScobravert]

I'm finding conflicting info, so I'll just ask here.

If I order the AR10 lower, will the LPK work? I'm under the impression that the ArmaLite stuff and DPMS stuff won't go together.

The LPK is different for AR10 vs AR15. It is actually easier to install; less roll pins to press in.

[hotrod66stang]

Ok, thanks. I'm going to vote for 2 of the AR-15 lowers, but honestly don't care which if they're truly the same exact part.

Also, I'm sure y'all can extract the info and put it all together, but on the spreadsheet I put down 3 lowers because I didn't see a spot for designating what you wanted. I would like to order:

(2) AR-15 lowers
(1) AR-10 lower
(2) LPKs

Thanks again for all the hard work!

[KBScobravert]

I can not access the spreadsheet on my notebook. Can someone put me down for 5 LPKs?

[DieselSmoke]

I can not access the spreadsheet on my notebook. Can someone put me down for 5 LPKs?

Gotcha..

[KBScobravert]

Gotcha..

Thanks

Sent from my SAMSUNG-SGH-I727 using Tapatalk