Announcement

Collapse
No announcement yet.

Cheap AR-15 Complete Uppers.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Charging handle is the same for both...

    Comment


    • #17
      Originally posted by GAP View Post
      But he's looking for a complete upper. You're still shy a barrel, nut, handguards, gas tube and gas block.
      Or a parts kit wouldnt hurt either. I am just trying to build a cheap AR-15.
      First hand witness at the failure of public healthcare.

      Comment


      • #18
        Originally posted by 5.0_CJ View Post
        Motoman ran across one yesterday. I'm not sure why you would want to shoot corrosive ammo through an AR-15 though.
        SUPER cheap plinking gun. I can swap the upper to .223 whenever I want to shoot some of my brass. I am used to the clean up procedure after shooting, I have to strip my Bulgy AK-74 down and clean it with hot water / soap after ever range trip. I don't mind, just the price to pay to shoot spam cans full of ammo at like .13 cents a round.

        Comment


        • #19
          Thanks Motoman and Bronco. I frequent AIM a lot, first time I have seen an 5.45x39 BCG

          Comment


          • #20
            Originally posted by IHaveAMustang View Post
            SUPER cheap plinking gun. I can swap the upper to .223 whenever I want to shoot some of my brass. I am used to the clean up procedure after shooting, I have to strip my Bulgy AK-74 down and clean it with hot water / soap after ever range trip. I don't mind, just the price to pay to shoot spam cans full of ammo at like .13 cents a round.
            Yeah that makes sense, if you don't mind the scrubbing.
            "When the people find that they can vote themselves money, that will herald the end of the republic." -Benjamin Franklin
            "A democracy will continue to exist up until the time that voters discover that they can vote themselves generous gifts from the public treasury." -Alexander Fraser Tytler

            Comment


            • #21
              Originally posted by IHaveAMustang View Post
              SUPER cheap plinking gun. I can swap the upper to .223 whenever I want to shoot some of my brass. I am used to the clean up procedure after shooting, I have to strip my Bulgy AK-74 down and clean it with hot water / soap after ever range trip. I don't mind, just the price to pay to shoot spam cans full of ammo at like .13 cents a round.
              My Polish Tantal gets the same treatment after range trips. First (and only) time I left it dirty the damn muzzle brake didn't want to let go of the barrel threads. Now I just spray it down with windex, remoil, and give it a good stroking.

              Comment


              • #22
                Originally posted by Brandon-k View Post
                My Polish Tantal gets the same treatment after range trips. First (and only) time I left it dirty the damn muzzle brake didn't want to let go of the barrel threads. Now I just spray it down with windex, remoil, and give it a good stroking.
                Happy ending?!

                Comment


                • #23
                  Originally posted by IHaveAMustang View Post
                  Happy ending?!
                  Always.

                  Comment


                  • #24
                    Originally posted by Brandon-k View Post
                    My Polish Tantal gets the same treatment after range trips. First (and only) time I left it dirty the damn muzzle brake didn't want to let go of the barrel threads. Now I just spray it down with windex, remoil, and give it a good stroking.
                    Wait... the muzzle brake is detachable on a CAI polish tantal?
                    First hand witness at the failure of public healthcare.

                    Comment


                    • #25
                      Originally posted by GAP View Post
                      But he's looking for a complete upper. You're still shy a barrel, nut, handguards, gas tube and gas block.
                      Got it!!
                      I purchased mine a already had hand gards. And barrel.
                      Last edited by soap; 10-13-2011, 06:12 PM.
                      sigpic🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄

                      Without my gun hobby. I would cut off my own dick and let the rats eat it...
                      🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄🐄

                      Comment


                      • #26
                        Originally posted by Mr_Fiux View Post
                        Wait... the muzzle brake is detachable on a CAI polish tantal?
                        Yes sir. One of these.

                        Comment


                        • #27
                          isnt exactly cheap...but a good deal on Spikes stuff

                          Comment


                          • #28
                            Originally posted by Brandon-k View Post
                            Yes sir. One of these.
                            They screw out to the left or right?

                            Oh shit that is right. If i take it out I need to put another american made muzzle break since it won't be 922r compliant
                            First hand witness at the failure of public healthcare.

                            Comment


                            • #29
                              Originally posted by Mr_Fiux View Post
                              They screw out to the left or right?

                              Oh shit that is right. If i take it out I need to put another american made muzzle break since it won't be 922r compliant
                              The only time a muzzle break is pinned is when the barrel itself is less than 16". There are 20 things that you can use. if you switch to a tapco magazine, you can put 3 imported parts on it for instance. If CAI shipped with a US magazine, you could be in violation now with those bakelite mags. CAI usually omits them from 922r though.
                              "When the people find that they can vote themselves money, that will herald the end of the republic." -Benjamin Franklin
                              "A democracy will continue to exist up until the time that voters discover that they can vote themselves generous gifts from the public treasury." -Alexander Fraser Tytler

                              Comment


                              • #30
                                Originally posted by Mr_Fiux View Post
                                They screw out to the left or right?

                                Oh shit that is right. If i take it out I need to put another american made muzzle break since it won't be 922r compliant
                                It's reverse threaded with the front sight indexing notch. My tantal came with one metal surplus mag and another plastic mag with a raised 2 at the bottom on the left side. No other markings but it does look like it's a Tapco product.

                                Comment

                                Working...
                                X