1/12 2010 gt500

[black2002ls]

Aaaaand. Time for clear again. I could have spent a little more time sanding away the jagged edges, but in the end, it seems ok. I lost a bit of the panel line on the door, and there is one spot down by the front of the skirt that is still pretty visible, we will see what happens when I clear it.





Sent from my SAMSUNG-SM-G930A using Tapatalk

[shumpertdavid]

Model or real, a trouble like that hurts and oisses you off

Your blending looks great

[black2002ls]

Model or real, a trouble like that hurts and oisses you off

Your blending looks great

Thanks. I'm hoping the rest of the line all but disappears once I clear it.

[black2002ls]

Paint repair appears to be a success. There is a small ridge where the repair line is, however, wet sanding and polishing should take care of that. I will need to rethink how I spray the trim though!



Sent from my SAMSUNG-SM-G930A using Tapatalk

[black2002ls]

Almost done! This was apparently a 4x4 model. I should have test fit the the suspension and lowered it a bit. I'm going to put Carbon Fiber decal on the wing for a little bit of pop.

2 1/2 year old included for size reference









Sent from my SAMSUNG-SM-G930A using Tapatalk

[bird_dog0347]

Very nice.

[black2002ls]

Thanks it is ALMOST done. I started the CF decals on the wing. The windows are in, fender badges are on. Once the wing is done, all that is lwft are door handles and miscellaneous touch ups

Sent from my SAMSUNG-SM-G930A using Tapatalk

[black2002ls]

Getting pretty close to done with this one. Door handles are glued in place, body was wiped down with wolfgang deep gloss liquid sealant. In a week or so i will wax it with colinite 915. It has some paint flaws, but I'm ok with it. Once it is waxed, I'll finish up the clear parts and add a wash to the panel lines. The wing has the CF decal on it and the first round of clear. It needs a bit of black touch up, clear leveled out, and re-sprayed.

[black2002ls]

And we are done! I managed 2 good pictures before my twonage made a solid attempt at an engine removal! :/

I'm going to try and get some dfwmustangs decals printed up for the windows. Either both quarters or the back glass.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Rick Modena]

Not to be picky, but the Cobra emblems on the fenders are on backwards.




Now if it was a 1993 Cobra, well then...

[black2002ls]

Not to be picky, but the Cobra emblems on the fenders are on backwards.




Now if it was a 1993 Cobra, well then...

Good eye. I will see if they will pop off....lol

Sent from my SAMSUNG-SM-G930A using Tapatalk

[bird_dog0347]

I'm glad you kept it original with the 4wd package they all came with.

[black2002ls]

I'm glad you kept it original with the 4wd package they all came with.

I hate it.... though with the stock wheels and tall tires, it would probably look worse lowered a bit.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[black2002ls]

I didn't get a picture of it, but the emblems popped right off, so they are now correct.

This will get displayed on a piece of 1/8 MDF covered in carbon fiber printed vinyl. The board will be over cut to allow me room to mount a cobra logo. The car will be centered over a mirror so the underside detail can be seen. Anyone want to buy it? Lol



Sent from my SAMSUNG-SM-G930A using Tapatalk

[4bangen]

Thinking I might build a model this week. you are rubbing off on me. lol