Anyone sporting 65 or 70" TV?

[CJ]

Logitech = only keyboard and mice. I will not buy their products outside of those two. I used to be a die hard Logitech fan until a few years ago.

I have yet to find a suitable replacement for these dog shit remotes.

[Craizie]

and on another note, today marks the 12th Harmony Remote I've had to RMA to logitech.

Logitech = only keyboard and mice. I will not buy their products outside of those two. I used to be a die hard Logitech fan until a few years ago.

[CJ]

and on another note, today marks the 12th Harmony Remote I've had to RMA to logitech.

[Gasser64]

So instead of being hot, it'll be noisy.

Not necessarily.

[SS Junk]

What you don't see is three 3 inch holes cut into the left, right, and middle of the cabinet where rack fans were installed in a push/ pull setup.

So instead of being hot, it'll be noisy.

[Craizie]

You are absolutely correct. Many of my customers don't think about that and it's the first thing I ask about when I arrive on site where a rack is being installed. Many times I'm making a last minute trip for cooling equipment. The racks in the picture have 3 components that get super hot, the audio processor, the video conferencing codec, and the amp.

I've seen so many people kill their electronics due to heat, that I just assumed this was going the same way. I didn't realize you install them for a living, I thought that was your personal setup. My bad!

[motoman]

Right on. Most people I know don't think about the heat aspect of their systems.

You are absolutely correct. Many of my customers don't think about that and it's the first thing I ask about when I arrive on site where a rack is being installed. Many times I'm making a last minute trip for cooling equipment. The racks in the picture have 3 components that get super hot, the audio processor, the video conferencing codec, and the amp.

[Craizie]

TV was centered up before I left. It's pushed over to the side in order to get to all of its inputs for programming.




What you don't see is three 3 inch holes cut into the left, right, and middle of the cabinet where rack fans were installed in a push/ pull setup.


Sent from my iPad using Tapatalk

Right on. Most people I know don't think about the heat aspect of their systems.

[motoman]

tv is off center

TV was centered up before I left. It's pushed over to the side in order to get to all of its inputs for programming.

I bet those cabinets get hot as shit.

What you don't see is three 3 inch holes cut into the left, right, and middle of the cabinet where rack fans were installed in a push/ pull setup.


Sent from my iPad using Tapatalk

[Craizie]

I bet those cabinets get hot as shit.

[8mpg]

tv is off center

[motoman]

Here's a little 90" I mounted a few months back along with a couple racks I put together and installed.

[diablo rojo]

There's some weird shit in there.

LOL.....welcome to my world.

[motoman]

Yes. I installed all of it. I do a lot of the framing as well.

There's some weird shit in there.

[diablo rojo]

I have to say there is some pretty badass art in that building. Have you done any art over at AT&T Foundry?

Yes. I installed all of it. I do a lot of the framing as well.