Tweet
Lil background of the car. I got it from a guy that had found it sitting for 7 years. Was mostly bone stock with the exceptions of a tremec 3550 and aluminum ds. Car looks to have been cared for, well for the most part. Got it with the plans of bolting a p1sc to it and leaving it alone. Well things have changed. I will get some pics up of the build when I can. I have a good friend of mine doing the work because my job does not have a schedule. And I have never been known to be the best at turning wrenches.
MODS GOING ON CAR:
3 core aluminum radiator
Procomp 190cc heads(yes out of the box ebay heads. I know guys personally that have them and have been in the low 5s with them)
crane 1.7s trickflow cromo pushrods
tricflow street heat intake
trickflow stg1 cam
professional products 70mm
deka 60lb injectors w/wal 255 intank w/kirban fuel reg
P1sc stg 2 kit(looking to run 13lbs with the kit)
Spec stg3 clutch
mac shortys
bassani uncatted x w/bassani catback
MODS GOING ON CAR:
3 core aluminum radiator
Procomp 190cc heads(yes out of the box ebay heads. I know guys personally that have them and have been in the low 5s with them)
crane 1.7s trickflow cromo pushrods
tricflow street heat intake
trickflow stg1 cam
professional products 70mm
deka 60lb injectors w/wal 255 intank w/kirban fuel reg
P1sc stg 2 kit(looking to run 13lbs with the kit)
Spec stg3 clutch
mac shortys
bassani uncatted x w/bassani catback
Comment