Originally posted by Scott Mc
View Post
Announcement
Collapse
No announcement yet.
4bangen's official rc tread.
Collapse
X
-
-
Originally posted by Scott Mc View PostFuck yea! Tou have to to the WB! Looks like the plane gave you a lot of fun till the end.
I will say it's last flight was one of its best too. I was really pushing it. That's probably why the motor came apart. Lol
Comment
-
-
Comment
-
Just got the new 8S X-maxx and decided to go all out with the huge over sized tires, CREE lights, shock socks, electronics protection bag, sway bars and a few other goodies. Thing is a beast at 34lbs and can do 68 MPH!!
Good judgment comes from bad decisions and a lot of that comes from bad judgment.
Comment
-
After a few years of not racing RC cars I decided to get back into it. A couple of local guys (Amarillo) put in a hobby shop with indoor off-road carpet track. So I pulled the old SCTE off the garage shelf and went to play. Ended up ordering a new RC10B6, Tekin 17.5 combo, Futaba 4PX radio as well as a new (back ordered) RC10B64 with Tekin 8.5 combo. Figured if they went to the trouble of putting in the track I might as well support them.
Comment
-
Comment
-
now that is going to be awesome..........
I've never had much interest in RC anything. messed with a few helicopters that were hand me downs from a couple buddies but never took the time to learn to fly them. I was hesitant to even open the boat, but I like boating and the water and opted to slip my boat this year so the marina will give me a fairy calm place to try this out. So far i've unboxed it, charged the batteries, and made sure it powers up and the remote was programmed.
Can anyone recommend me a "light oil" to lube the motor bearings with. That's all the manual says about maintenance for that is to use a light oil. I don't see an oil port so I assume I just put a little where the shaft end is at each end of the motor?
Comment
-
finally I'm sharing the last flight and crash of the firetruck.
so here it is, the fire truck is coming back eventually and as a 16ft plane instead of a 12 foot plane. That is if I can find the sponsors to get it done. The last one cost me $500, the next one will be over a grand.
Comment
Comment