![](http://www.n56ml.com/kmlad15.jpg)
One layer of 5.85 oz fiberglass was applied to the inside surface of the deck, along with a few additional plies in the vicinity of the roll bar. The roll bar is basically a 2" x 2" curved box beam, with about 6 layers of 9 oz cloth on each of the four sides. Trying to squeeze the two legs of the C together with about 50 lbs of force yields maybe .1" of deflection. This mama is STRONG!
![](http://www.n56ml.com/kmlad13.jpg)
![](http://www.n56ml.com/kmlad16.jpg)
The end result. Perfection has been achieved, at least close enough for KR work. The end result weighs 9 pounds, including integral roll bar.
Comment