1st time paint job

[jw33]

Safety Orange from Ace Hardware with a foam roller and gloss black Rust-Oleum for the stripes. About $40 for everything, including the tape and paper.

[FOKAI]

Wow really? Think I would of spent the money. Unless that's the look your going for. Good luck on build.

[Jester]

You should have spent $100

[Mike]

Nice!

Wow really? Think I would of spent the money. Unless that's the look your going for. Good luck on build.

You should have spent $100

Lemons car, lol.

[Mark Preus]

Finally we have a good painter on the board.

[Baba Ganoush]

Nice touch on the boss moniker.

[sosoe]

Dville helped out?

[4king]

Hit the paint with some 2000 grit sand paper. Use some M205 and buff it with a foam pad on a rotary buffer and I bet it wil smooth out all that garbage in the reflection

Your stripe looks like a two year old drew it, good luck on that

[jw33]

Does anyone have a recommendation where I could take it to get wet sanded and buffed?

[jw33]

Your stripe looks like a two year old drew it, good luck on that

You know how when you make a copy of a copy of a copy?

[Jester]

Does anyone have a recommendation where I could take it to get wet sanded and buffed?

paint over the stripes and make it solid orange......will look tons better.

[Baba Ganoush]

paint over the stripes and make it solid orange......will look tons better.

Disagree.



Single stage paint? Don't even try to color sand. It's perfect.

[4king]

Wet sanding really isn't that difficult. You are leveling the surface of the paint. 2000 grit can be easily buffed back to life with a $60 rotary buffer from pep boys and a $20 bottle of meguiars M205 also at pep boys. I did my entire bullet wet sanding and buffing in about 8-10 hours

My car had a single stage paint job which was paint and clear so that's why my buffer pad is green

[Baba Ganoush]

[Mysticcobrakilla]

Lmao @ the people seriously replying to this thread.


Looks pimpin op