Got my 408w today

[KBScobravert]

I still need to get my lower back from tmoss, then get it powder coated. My brother and I usually tackle everything, but hell I won't turn down help! Do you have a drill press? I need to drill and tap my upper for the ACT sensor, I'll compensate with beers

Drill, TIG in a NPT weld bung would be my choice.

[white88]

Drill, TIG in a NPT weld bung would be my choice.

What about those three provisions in the back of my upper? Shouldn't that be enough the drill/tap into?

[KBScobravert]

What about those three provisions in the back of my upper? Shouldn't that be enough the drill/tap into?

Hand drill and tap is easy. I think those are set up to be made into 1/8"npt.

BUT they are not big enough for the 1/2" that the IAT probably is.

edit: 1/8", 1/4", 3/8", 1/2"NPT taps, I have them all. Simple to use and take just a minute.

[black50]

Nice! I had a cervini 4 inch cowl and it still rubbed on the elbow in my 89. Maybe lower profile motor mounts will help you squeeze that Windsor in there with a reasonable size Hood. Good luck on your build, love the 408!

oh its possible to get it under a stock hood..drop mounts, spacers for k-member and low profile intake elbow...