My 91 Coupe Termi Build

[petyweestraw]

Dash looks like a lot of work.

Sent from my ...... wait no one cares.

[1kwikGT]

Been a long time since I have updated, just need to finish the wiring, fuel system, and some other odds and ends. Hope to have running in the next couple of months. On to some updated pics.

[SSsierra90]

What's the plan for the door panels

[1kwikGT]

Stock door panels for now, just have to finish the window and door lock wiring.

[Blackpony]

blower belt isnt routed correctly. it goes on top of the smooth pulley at the bottom near the crank pulley...

nice work though interior looks killer!!

[1kwikGT]

Yeah, I know. It's the wrong belt and not long enough. Already ordered the correct one.

[Juiced4v]

Amazing!! excellent work!!

[KBScobravert]

Looks like you are pretty close. I love some mod motor fox bodies.

[Wish4svts]

Very nice work.

[1kwikGT]

Thanks, it's taken quite a bit of time to do it right but I don't want to have to go back and fix things later. The only thing I want to do after it is running is a whipple or VMP TVS.

[Moose242]

Awesome build man!

[1kwikGT]

Been a while since I have updated. Wiring, interior, p/s, hydra boost and brakes pretty much done. Ran all new brake lines front to rear with a Willwood adjuster. Hooked up and mounted the heat exchanger, pump and all the lines. Driveline is complete as well. Still need to finish up the fuel system, need a new radiator and a few other odds and ends. For those with a return fuel system where does your vacuum line on the regulator run to? Not sure if it should go to the lower port or upper, I'm assuming the lower port as that is where the boost guage goes to. Anyway, on to the pics. Here is how she sits today, a little dirty.

[lincolnboy]

Would give two nut for a coupe again.

[Scott Mc]

Much love for the setup! FYI if you still have your misc stuff for sale after the holidays I would be interested.

[Cobraman]

If I was at all mechanically inclined id swap my sn95 dash over to the 86. Just seems tough