My LS-Coupe Turbo Build

[dville_gt]

I has spare tank.......... 79-95 are the same.

i was looking at one of those pre-fabbed sumps. you still have the straps/filler neck? how much you want for it?

[KBScobravert]

i was looking at one of those pre-fabbed sumps. you still have the straps/filler neck? how much you want for it?

I have a 1995 tank and cover. It is not sumped and there are no straps (those I have are different) and no filler neck. Come get it for $25 (beer money for this weekend). I am off both tomorrow and sunday and will be trying to figure out my mess in the garage.

[dville_gt]

i'll try to swing by sunday. i've got a crazy weekend. gotta try to find a filler neck as well. the straps should be easy enough to fab.

[KBScobravert]

i'll try to swing by sunday. i've got a crazy weekend. gotta try to find a filler neck as well. the straps should be easy enough to fab.

I have the sn95s and with a simple mod you could make them work I am sure. They are yours if you want.

PM me when you want to swing by.

[FRANCISCO308]

i'll try to swing by sunday. i've got a crazy weekend. gotta try to find a filler neck as well. the straps should be easy enough to fab.

junk yard should have the filler neck and straps.

good luck with the rebuild James. she's gonna fly with more boost.

[dville_gt]

I have the sn95s and with a simple mod you could make them work I am sure. They are yours if you want.

PM me when you want to swing by.

awesome. pm me your number if you don't mind.

junk yard should have the filler neck and straps.

good luck with the rebuild James. she's gonna fly with more boost.

thanks man, machine shop said 1 week so hopefully that is realistic!

[KBScobravert]

awesome. pm me your number if you don't mind.

pm'd

[Sam88gta1]

junk yard should have the filler neck and straps.

good luck with the rebuild James. she's gonna run 5.8's with more boost.

Fixed.

[TINKRD]

the thin deck stock lsx heads + 4 bolt design has limitations on cylinder pressure. hell, i was on stock 317's, stock head gaskets, and stock TTY head bolts @ 17psi and never pushed a drop.

i do agree with you though, magnifying the cylinder pressures via detonation increases the odd's you will have a problem, but i don't think that it is safe to say that you can tune around the design completely (at least not with out copper rings or o-rings). i know jp is making it @ 1000rw and that is awesome, but i bet you that neither he, you, nor I would be surprised if he starts pushing water with it either, just like i wasn't surprised that off all 8 cylinders, the notorious #7 let go on me.

Little late to the party but I would be surprised. My car has been beat the fuxk on and not a drop pushed. Good gas, good tune. Simple as that

[XR_1]

How much power are you trying to make. The pump should be ok but the injectors are going to get pretty close to max power around 700-750rwhp. My 80lb injectors were done around 650rwhp on E85 I now have 160lb injectors. My pump might be the next thing I need to upgrade or add a second pump.

x2

The pump should be 900-950 rwhp on e85
I made 960rwhp using the eliminator and 160 injectors, the pump was maxed out
I installed a PRO series after that but never maxed that one out
Now I have 2 Magnafuel 650 pumps, 2nd one turns on around 3.7k RPM

Good Luck

[dville_gt]

Little late to the party but I would be surprised. My car has been beat the fuxk on and not a drop pushed. Good gas, good tune. Simple as that

what gas are you running?

[War Machine]

Lol@ Sam voted 4 Obama tag.

[TINKRD]

what gas are you running?

116

[dville_gt]

116

Not feasible for me to run full time.

[FRANCISCO308]

116

race car shit