twin turbo Zephyr runs 11.54@114.16

[DarrenK]

The setup


The vid....

https://www.youtube.com/watch?v=8RaF8_-hZTA

[Alex]

And it's still a zephyr

[SS Junk]

I don't think the music was loud enough.

[LaserSVT]

I don't think the music was loud enough.

+1

[SSMAN]

That is a whole lot of stock parts under boost.

[DarrenK]

The music was played by the track over the pa. It was too loud.

[Denny]

Fucking shit! Haters!!!

The original Fox was scooting! Even the Pullmyfinger Camaro was a-hating on an 11 second pass.

[redrocket5.0]

Nice pass man, have any oics of under the hood?

[SonicblueGT03]

Nice run, gotta love the Z!

[helosailor]

Bit Defender no likey that first link, trojan-like activity.
Can you copy/paste the setup info?

[DarrenK]

Bit Defender no likey that first link, trojan-like activity.
Can you copy/paste the setup info?

Specs

Engine - 1987 Mustang 5.0 HO

1. Block –stock

2. Rods –stock

3. Rod Bolts -ARP

4. Pistons –.030 over TRW replacements 8.92:1 cr (w/ 54cc head)

5. Crank –stock

6. Heads –stock E7TE w/air injection humps removed

7. Head Bolts -stock

8. Valves –stock

9. Cam -stock

10. Rockers -stock

11. Main Bolts -stock

12.Compression - approximately 8.5:1 with the stock 64cc heads

Induction

1. Intake – Carbureted Edelbrock Performer 302

2.Carburetor –Holley 650 dbl pump setup for blow through

3. CSI carburetor bonnet

Fuel System

1.Fuel Pump – Aeromotive 1000hp pump part # 11101

2. Fuel pressure regulator - Aeromotive boost referenced model #13202

3. 10 AN feed and return lines - 8 AN from regulator to carburetor

Exhaust

1.Headers –1 5/8 inch JBA Firecones flipped to feed turbochargers

2. 2.5 inch exhaust

3. Dynomax Ultra-Flo welded mufflers

Ignition

1. Ford Duraspark distributor

2. MSD6BTM

3. MSD blaster 3 coil

4. FMS plug wires

5. Autolite 23 plugs gapped to .023 (until further testing)

Transmission

1. 1978 C4 case fill design

2. Custom billet converter by Phoenix Transmission Products ~ 3200 stall

3. Hurst Pro-matic 2 shifter

4. TCI hardened input shaft

5. Kevlar bands and clutches

Axle

1989 Mustang 8.8 w/9 inch ends, welded tubes, 33spline spool & axles, 3.08 gears, braced housing

Power Adders

Pair of .63/.60 A/R Garrett T3 turbochargers

Intercooler

Custom Ford fox body intercooler by Jim Sheren

[helosailor]

Damn, that's not bad at all for what sounds like a mild setup.

[Damnittsteve]

somebody call bsharer!

[91CoupeMike]

Is that the dark green car with flipped headers?

License play was TT something?

Or am I thinking of a fairmont, I think the LP was TTmont

[DarrenK]

Is that the dark green car with flipped headers?

License play was TT something?

Or am I thinking of a fairmont, I think the LP was TTmont

You're thinking correctly, that is Sharer's car his is a fairmont.