got home yesterday and found a box had arrived and guess what was inside
a big fucking carb!!!
A Pro Systems SV-1 to be exact.
![](http://farm7.static.flickr.com/6107/6292876158_390dbd1da7_z.jpg)
![](http://farm7.static.flickr.com/6043/6292879680_99b95706f9_z.jpg)
![](http://farm7.static.flickr.com/6039/6292877484_ec826a110c_z.jpg)
sorry, couldn't find a DP can but its 110mm
![](http://farm7.static.flickr.com/6225/6292358885_b694b4321a_z.jpg)
other side
![](http://farm7.static.flickr.com/6231/6292881268_bec23cd337_z.jpg)
better have an open plenum to run this monster
![](http://farm7.static.flickr.com/6223/6292886758_a19d283785_z.jpg)
this will be going on top of a 547 big block with ported P51 heads and a port matched Victor. For those that don't know, P51s were designed by Jon Kaase and flow close 400cfm @ .800 lift out of the box using a factory CJ port location. Mine were flowed at ~400 @ .500 lift and 420 @ .600. I'd be happy to post pics if any one is interested but there doesn't seem to be much BBF love on here.
a big fucking carb!!!
A Pro Systems SV-1 to be exact.
![](http://farm7.static.flickr.com/6107/6292876158_390dbd1da7_z.jpg)
![](http://farm7.static.flickr.com/6043/6292879680_99b95706f9_z.jpg)
![](http://farm7.static.flickr.com/6039/6292877484_ec826a110c_z.jpg)
sorry, couldn't find a DP can but its 110mm
![](http://farm7.static.flickr.com/6225/6292358885_b694b4321a_z.jpg)
other side
![](http://farm7.static.flickr.com/6231/6292881268_bec23cd337_z.jpg)
better have an open plenum to run this monster
![](http://farm7.static.flickr.com/6223/6292886758_a19d283785_z.jpg)
this will be going on top of a 547 big block with ported P51 heads and a port matched Victor. For those that don't know, P51s were designed by Jon Kaase and flow close 400cfm @ .800 lift out of the box using a factory CJ port location. Mine were flowed at ~400 @ .500 lift and 420 @ .600. I'd be happy to post pics if any one is interested but there doesn't seem to be much BBF love on here.
Comment