All this talk about racing trucks

[80coupe]

I have a McGaughys 5/7 kit with shocks/flips kit for the rear and drop spindles. It's very low.

How low do you want it?

as low as i can with out doing the c notch kit! looking a 3/5 really or level it out.

[OrangeChevyII]

Same, I like belltech.

[dblack1]

as low as i can with out doing the c notch kit! looking a 3/5 really or level it out.

Having done this drop before I'd stay with a 2/4. At 5" you really don't have enough space for rear suspension travel. My four wheeler had it riding on the pancake bumpstop and towing was out of the question.

I went to a 2/4 after that, which rides better anyway as the factory suspension is used.

[80coupe]

Having done this drop before I'd stay with a 2/4. At 5" you really don't have enough space for rear suspension travel. My four wheeler had it riding on the pancake bumpstop and towing was out of the question.

I went to a 2/4 after that, which rides better anyway as the factory suspension is used.

2/4 looks pretty good.

[VaderTT]

Having done this drop before I'd stay with a 2/4. At 5" you really don't have enough space for rear suspension travel. My four wheeler had it riding on the pancake bumpstop and towing was out of the question.

I went to a 2/4 after that, which rides better anyway as the factory suspension is used.

Yeah, I hit my bump stops all the time, lol.

[JamisonFRC]

I'm on a 2/4 with trimmed bump stops. I still bottom out quite a bit. Other than bottoming out it rides very good. I need to trim a little more off to gain some travel.

[80coupe]

i think im gonna go with McGaughys 2/4.

[VaderTT]

Yeah, I'm going to trim my stops a bit and look for some stiffer front springs.

[Z06killinsbf]

I like this place, good prices and I MAY be able to get a discount code.

http://thesuspensionsource.mybigcommerce.com/index.php

[VaderTT]

Change the subject a bit. I need to find some plug and play injectors. I'd like to go with something 50lb or bigger but all I've found are the delphi marine 44lbs and they are a plug and play, Delphi part #17113739.

Wanted to order this weekend as I already bought the turbo.

[naynay]

I found an old picture...

would i have ever seen you hot doggin this truck around garland (NWHWY/635) on big n littles back in the day???

[naynay]

anyone heard of any lsx swaps in the 04+ F150s? i'd love to get this foreign (to me) 5.4 out of there and do a 6.0/6.2 sway in my supercrew

[OrangeChevyII]

Not that truck, although that is my area. That truck was pretty quick, it was a beast on the HWY.

[streetdemon70]

^Looks good man!

thanks man. Gonna do 3/6 drop and smaller tires over the winter then i will post up some more pics. Got my stock 17's back on for now.

[Z06killinsbf]

Found a drop kit

http://dallas.craigslist.org/dal/pts/2647049950.html