early pics of my 351 build

[TEAMJACOB]

Whoops meant to post this one too

[TruestreetTim]

Thanks for stopping by! But I thought you'd be better looking than your avatar

[TEAMJACOB]

Thanks for stopping by! But I thought you'd be better looking than your avatar

Lol. This is a common misconception.

[Diabolic]

Shooting for 375-400 at the flywheel NA?

Is than a E303 or F303?

[dumpycapri85]

Shooting for 375-400 at the flywheel NA?

Is than a E303 or F303?

M-6250 is an F .

[Diabolic]

http://www.summitracing.com/parts/FMS-M-6250-E303/

Could be either.

[TEAMJACOB]

http://www.summitracing.com/parts/FMS-M-6250-E303/

Could be either.

It is an f cam. Toby was showing me how that cam wasn't a good fit for what I'm trying to accomplish. I went with a lunati cam. I don't know the specs but I'm sure he'll speak up if he or tim see this.

[TEAMJACOB]

Its for sail by thee weigh

[TEAMJACOB]

Shooting for 375-400 at the flywheel NA?

Is than a E303 or F303?

375 to 400 REAR wheel. Then the spray

[Diabolic]

What do the heads flow? Is that a TF R intake or a Track heat? What are the specs on the Lunati Cam? Is that a 70mm Race Accufab?

[TEAMJACOB]

What do the heads flow? Is that a TF R intake or a Track heat? What are the specs on the Lunati Cam? Is that a 70mm Race Accufab?

Don't know about the flow on the heads. I had them milled and cleaned up a bit.
It was a tf r but I sold it and picked up the spyder intake and 90 degree elbow posted below that.
Its a 90mm accufab tb

[Diabolic]

With some 1 3/4" longtubes and a camshaft that has at least 230 duration you should easily hit the 375 mark. Some ported or maybe even OTB Vic Jr heads would make or exceed 400fwhp. That's a nice intake and TB setup.

[TEAMJACOB]

With some 1 3/4" longtubes and a camshaft that has at least 230 duration you should easily hit the 375 mark. Some ported or maybe even OTB Vic Jr heads would make or exceed 400fwhp. That's a nice intake and TB setup.

Yeah I picked up so long tubes off here about a week or go. And I got a smokin deal on the intake,elbow,tb,njectors, rails, and power pipe

[TEAMJACOB]

[TEAMJACOB]

Here is a pic that Tim up at true street sent me today