BRR's newest project: Project Stepchild

[barronj]

could not look any better.

[RuStYpNuS]

OK SO HERE IS THE LATEST. not much has changed but here is some to tide yall over.









and what do yall think......ceramic coat these as well???

[RuStYpNuS]

1/24/13
my converter arrived today.........SWEET!!!!!






and here is my fuel rails back from the coater



SHE GOES BACK IN THIS WEEKEND SO I CAN START FINISHING UP THE WIRING AND THEN ALL THATS LEFT IS FINISHING THE FUEL LINES.....F-IN A COTTON

[GeorgeG.]

wow man! looks freaking awe$$$$$ome!!

[RuStYpNuS]

George it might need a few $ signs before I'm all said and done

[dumpycapri85]

We need to ditch the spacer and get a GT40 NOS spray bar !

[RuStYpNuS]

I've got a nitrous express place kit in mind

[Juiced4v]

Wow...very nice!!

[dumpycapri85]

I've got a nitrous express place kit in mind

TB plate or phenolic plate ?

[RuStYpNuS]

Phenolic. I'll show you some pics tomorrow.

[RuStYpNuS]

Well today was a great day. PROJECT STEPCHILD GOT HER HEART PUT BACK IN........ALTHOUGH SHE ISNT BEATING YET ITS COMING TOGETHER NICELY. THE REST OF THE ENGINE BAY DOESNT DO THE ENGINE ITSELF JUSTICE. I will spend time off and on over the next year going through and replacing and cleaning what needs be and relooming every wire i can get my hands on.

TO DO LIST:

Fuel rails- bought and ordered just awaiting arrival then they will get installed
Wiring- Im going to combine the FMS MAF conversion harness with my engine harness and eliminate all connectors that will not be used ( Old IAT, Bank injector circuits, EGR and Emissions)
Secondary Tranny cooler- Im going to use the stock cooler and loop into a Ford Racing unit
Cooling- U/L Radiator hoses and install radiator then wire in Flex Fan setup to the supplied controller
Gauges- I have to run and wire in my Electronic Fuel Pressure gauge and my Innovate MTX-L and will probably pick up a Trans temp gauge.
Exhaust- I have to have the exhaust shop finish off my exhaust after I get it running
IM SURE THERE IS A LOT OF OTHER SMALL CRAP I HAVE TO DO AS WELL BUT THATS THE JIST OF IT. IM HOPING 2 WEEKS SINCE I HAVE BACK TO BACK 3 DAY WEEKENDS

Then its your turn Charles a.k.a. Diabolic to work your tuning magic
LETS GET TO IT SHALL WE

[projectPONY]

Sorry if I missed it, but is that powder coat on the intake and valve covers?

Sent from my SPH-L710 using Tapatalk 2

[FOKAI]

Nice work don't see these driving around much anymore.

[dumpycapri85]

Sorry if I missed it, but is that powder coat on the intake and valve covers?

Sent from my SPH-L710 using Tapatalk 2

All the silver is cerami coat and all the black is powder coat .

[SEB]

Dang looking good! Motor outshines the rest of the truck! But im sure the Body is next once you get her running.

Circle D makes BadAss Converters. What size did you get