Sprockets

[noshine4mine]

Well it is time for a new chain and I am curious about changing out my sprockets to something a little more fun. I have a 06 zx6r, im asking about personal expierence with milage and torque. So far my best milage has been 42mpg, will I reduce this significantly using the -1 +2 sprocket setup? What is the full on stunting sprockets for a 636? An easy 2nd gear wheelie would be nice maybe even a 3rd gear wheelie occasionaly.

Thanks,

[VaderTT]

Get an SI 64t.

[noshine4mine]

SI ?

I understand 64 tooth

[Skidmark]

Your stock gearing is 15/43.

I would recommend going -1/+3 for more fun all around.

https://www.motomummy.com/chain-kits-with-steel-front-and-rear-sprocket/driven-evo-spec-kawasaki-520-superlight-steel-chain-kit-with-est-technology/

The kit, plus chain would run $175.

Patrick on the board here could probably get you a better deal, but for this I like ordering through motomummy. You can add a SpeedoDRD for $65 to your order to correct your speedo.

[dsrtuckteezy]

if you want to go -1 +2 just go +5 in the back and leave the counter sprocket stock..

[noshine4mine]

-1 +2 enough to pull 3rd gear wheelies on a 600? (or +5)

[VaderTT]

-1 +2 enough to pull 3rd gear wheelies on a 600? (or +5)

Clutch or power? Clutch yes, power, don't do'em.

[lowthreeohz]

Yes it's enough with clutch, don't do powpows

[silverhatch]

[ame]http://www.youtube.com/watch?v=QHZR9SA5pOg[/ame]

[noshine4mine]

Thanks, I picked this up yesterday. 175.00 is a pretty good price considering it comes with an Xring chain.

Your stock gearing is 15/43.

I would recommend going -1/+3 for more fun all around.

https://www.motomummy.com/chain-kits-with-steel-front-and-rear-sprocket/driven-evo-spec-kawasaki-520-superlight-steel-chain-kit-with-est-technology/

The kit, plus chain would run $175.

Patrick on the board here could probably get you a better deal, but for this I like ordering through motomummy. You can add a SpeedoDRD for $65 to your order to correct your speedo.

[Big A]

I did -2 +3 on my R6, and it really woke up around town. Killed the top-speed though, and raised the RPM at highway speeds a bit.

[noshine4mine]

Man I am disappointed. There is no replacement for displacement.

I was trying to gear my 600 into a 1k; can't be done.

Sprockets for sale!!

[LANTIRN]

I suggest you call these guys. I hear they are the best when it comes to sprockets.

[noshine4mine]

cogswell cogs is more my speed.


I will admit the bike stays in that 'omg that sounds good range', I just cannot drive like it wants where I live. Or I need stock exhaust.