Two separate minor outdoor lighting issues.

[cad424]

Issue 1: My flood light will not turn off. I've check the settings, cleaned the sensor and reset the breaker all to no avail.

Any ideas?

Issue 2: I use dusk to dawn sensors on my front and back porch lights. Recently my front porch lamp won't work with the censor. If I install a light directly into the lamp it's fine. If I use the sensor it will flicker when I turn it off and on but won't remain constant.

Any thoughts?

[dblack1]

those sensors go bad. I've got a few on the warehouse a replace every few years.

[cad424]

those sensors go bad. I've got a few on the warehouse a replace every few years.

That's what I initially thought. I bought a new one and the same thing is going on.