Announcement

Collapse
No announcement yet.

new home construction

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    I'm not going to get into the list of things to think about for new home construction, it is massive and I'm not even close to an expert.

    The biggest and most vital thing is your builder he/she will be the key to success for you. My Dad is a builder and checks the sites everyday (other then when he is hunting or out of town, but he checks the immediately upon return). I don't see that being too much to as for out of a builder either.

    Anyway, as far as costs going over and such. I've talked with my Dad about this in the past and apparently it is a fairly common problem that can somewhat be avoided. He does not pass any costs on to the homeowners UNLESS it is a homeowner issue that caused the overage (i.e. plan changes mid build...etc). He has been building houses, framing or something home related for around 45 years now. Not much catches him by surprise.

    I would definitely make sure you have scheduled meetings with the builder that he/she agrees on. Once every two weeks should be fair, no less then once a month and no more then once a week IMO. Don't jump his balls for every flaw you see, a good test is to nicely ask about various problems and he/she (oh FFS, who am I kidding...HE) should answer with...

    a. The reason it is not a flaw (as perceived by the untrained eye) and why something is the way it is and how it'll be cosmetically or otherwise taken care of...

    b. When it'll be fixed, cause he knew about it already.

    c. He won't have a clue it was there, which obviously happens that a builder will miss something. However, if this option happens over and over you need to be concerned. If a. and b. happen, just bring up your punch list in the meetings you have - chances are he'll be working the issues already.

    A good builder will scold, fire and so forth his subs to make sure his end product is as flawless as possible.

    Anyway, IMO it is all about the builder. You may think you know a lot, but chances are a good builder knows way more and that's the key to a good finished home.

    Take care
    Originally posted by MR EDD
    U defend him who use's racial slurs like hes drinking water.

    Comment


    • #47
      btw I have a brother-in-law that has been a builder in the north Austin/Round Rock even up to Georgetown area for more than 30 years. If you have any local questions let me know.

      Comment


      • #48
        oh yeah.. drains in the garage floor. Being able to wash your car inside would be nice.

        Comment


        • #49
          Originally posted by sdun View Post
          I didn't read every post in detail so sorry if it's been said.

          2x6 exterior walls on 24inch centers

          I saw all of the foam arguments. So here is what I do. Optima in the walls on a 2x6 wall is an r23. Wrap the house with the radiant barrier foam( comes in 4x8 sheets foam with foil on both sides). At the corners and around windows/doors use the cool deck that you use on the roof decking except on the exterior walls turn the foil to the outside. Aluminum tape all of the seams.
          With the 1 inch foam sheathing your exterior walls are a r29 That's better than most peoples attics!

          R-49 in the attic

          At least 19 seer hvac

          The last several houses that I built were built like this. The smallest was 3200sp ft and the largest was 4600. Of the 4 home owners that I have talked to 1 house on 1 month had an electric bill over $200.

          I saw something about water lines, heres the best that I have found. How many you use depends on the layout of the house you can use manifolds for the hot and cold watter. Some houses I use 4 (2 each) It's like a breaker panel for water. We used pex on the houses with the manifolds. Everything has it's own ball valve, the hose bibs can be turned off in the winter, you can turn off any water fixture in the house quickly in case of an emergency.

          I'm tired of typing, if you have any energy saving questions pm me. I have taken a ton of test on this and have implemented a lot of ideas on houses with great success.
          I'm also a custom home builder (in Ellis county) and I'd like to see your houses or maybe come by sometime. My daughter lives that way, and I can swing by and check them out. Those 19 seer unit's are overkill for Texas, IMHO, and the folks I build for wouldn't pay double for the little savings over my typical 15 seer units.

          Comment


          • #50
            I just threw 19 seer out there. The big gains are when you get into the variable speed stuff around a 16, of course this is where the price jumps up. Building in the price range we are in is very slow out here(350 to 750). I have not started anything new in a while.

            Comment

            Working...
            X