Tweet
1987 GT Roller - $2200
Exterior-
The paint on the body panels is ok. The paint is flaking off of the ground effects.
The body is straight. The ground effects are rippled like so many do. And the hatch has some rust under the paint.
Suspension -
AJE tubular K-member w/ tubular A-arms
Flaming River Manual rack and pinion
UPR front coil overs
UPR double adjustable upper control arms
UPR adjustable lower control arms
UPR caster/camber plates
Strange 10-way adjustable shocks and struts
Sub frame connectors
5-lug conversion / brakes -
Front - 94/95 spindles w/ 99-04 GT 2-piston PBR calipers(new), stock replacement rotors(new) Russell braided brake lines
Rear - 50resto axles(28 spline)/drums with Moroso extended wheel studs
I have extended studs for the front but they are not installed.
Rear axle - 8.8 - Richmond 3.73 gears
Trick Flow Differential Cover w/ bearing cap support.
Interior -
New Black carpet from 50resto.
6-point Roll Bar by Precision Racecraft.
Electrical/Misc-
The engine harness is a stock 87 harness(speed density). There is no ECU with the car.
Underhood harness converted to 3G alternator.
In-tank 255 Walbro pump installed.
There is no exhaust under the car. (BBK Shorties O/R H-pipe are available)
More Pics can be seen here: http://s279.photobucket.com/albums/k...tang%20Roller/
The car is being sold with the 5-spoke 17" wheels. The 18" Wheels/Tires are being sold separately.
The turbo kit, 42#FMS fuel injectors, cowl hood, nitrous kit, and seats will be sold separately unless somebody makes a deal.
I am probably forgetting something. If you have any questions, just ask via PM or you can e-mail me. My screen name is the same for my Gmail.
You can also call me at (3two5) 26six1 3two7six
Exterior-
The paint on the body panels is ok. The paint is flaking off of the ground effects.
The body is straight. The ground effects are rippled like so many do. And the hatch has some rust under the paint.
Suspension -
AJE tubular K-member w/ tubular A-arms
Flaming River Manual rack and pinion
UPR front coil overs
UPR double adjustable upper control arms
UPR adjustable lower control arms
UPR caster/camber plates
Strange 10-way adjustable shocks and struts
Sub frame connectors
5-lug conversion / brakes -
Front - 94/95 spindles w/ 99-04 GT 2-piston PBR calipers(new), stock replacement rotors(new) Russell braided brake lines
Rear - 50resto axles(28 spline)/drums with Moroso extended wheel studs
I have extended studs for the front but they are not installed.
Rear axle - 8.8 - Richmond 3.73 gears
Trick Flow Differential Cover w/ bearing cap support.
Interior -
New Black carpet from 50resto.
6-point Roll Bar by Precision Racecraft.
Electrical/Misc-
The engine harness is a stock 87 harness(speed density). There is no ECU with the car.
Underhood harness converted to 3G alternator.
In-tank 255 Walbro pump installed.
There is no exhaust under the car. (BBK Shorties O/R H-pipe are available)
More Pics can be seen here: http://s279.photobucket.com/albums/k...tang%20Roller/
The car is being sold with the 5-spoke 17" wheels. The 18" Wheels/Tires are being sold separately.
The turbo kit, 42#FMS fuel injectors, cowl hood, nitrous kit, and seats will be sold separately unless somebody makes a deal.
I am probably forgetting something. If you have any questions, just ask via PM or you can e-mail me. My screen name is the same for my Gmail.
You can also call me at (3two5) 26six1 3two7six